Bunny Soap Shaper + Stamps + Extruder Discs (PLA) Made-To-Order + FREE custom Sizing
🍁 Made in Vancouver, Canada
📦 Ships worldwide
Prices are in Canadian Dollars. To our U.S. customers – don't forget that the exchange rate works in your favour, it's like an extra discount.
• Bunny Soap Shaper
• Bunny Face 01 Stamp detailed eyes (3 sizes available)
• Bunny Face 02 Stamp oval eyes (3 sizes available)
• Ear detail Extruder Disc (18 mm, 23 mm, 24 mm, 53 mm or 57 mm)
• Eye 01 Extruder Disc (18 mm, 23 mm, 24 mm, 53 mm or 57 mm)
• Eye 02 Extruder Disc (18 mm, 23 mm, 24 mm, 53 mm or 57 mm)
• Mouth Extruder Disc (18 mm, 23 mm, 24 mm, 53 mm or 57 mm)
• Full Set including everything above
Designed for cold process soap makers of all levels. Must have a basic understanding of cold process soap making and safe lye handling practices. An introduction letter containing directions, tips, and tricks is included in every order, to help you get started.
The Bunny soap pictured was poured upside down, and the Bunny Soap Shaper is designed for this method.
These are made-to-order items. To ensure timelines for made-to-order items stay within the 1-week range, we do regular restocks as current orders are completed. While most orders are completed within 1 week, please allow up to 2 weeks if you have multiple items in your order. If you wish to know current wait times, please don’t hesitate to reach out via email.
Soap Shaper Sizing
Choose from one of the popular mold sizes in the drop-down menu, or select "Other" and provide your mold specifications. Precise measurements are important, and we encourage you to double-check all measurements. Here's an easy step-by-step guide on measuring your mold > Alternatively, you can specify the size that you would like your Soap Shapers to be (width x height), and we will match that size.
STAMP SIZE – SMALL
With handle: 38 (wide) x 25 (high) with a depth of 25 mm
Stamp design: 31 (wide) x 16 (high) or slightly narrower
With handle: 1.49 (wide) x 0.98 (high) with a depth of 1 inch
Stamp design: 1.22 (wide) x 0.63 (high) or slightly narrower
STAMP SIZE– MEDIUM
With handle: 47 (wide) x 31.25 (high) with a depth of 25 mm
Stamp design: 39 (wide) x 20 (high) or slightly narrower
With handle: 1.85 (wide) x 1.23 (high) with a depth of 1 inch
Stamp design: 1.54 (wide) x 0.79 (high) or slightly narrower
STAMP SIZE – LARGE
With handle: 54.5 (wide) x 36.5 (high) with a depth of 25 mm
Stamp design: 45 (wide) x 23 (high) or slightly narrower
With handle: 2.15 (wide) x 1.44 (high) with a depth of 1 inch
Stamp design: 1.77 (wide) x 0.9 (high) or slightly narrower
Love Your Suds
Custom Craft Tools
Custom Craft Tools
TALL & SKINNY Heavy Duty CLEAR Soap Mold
LARGE Heavy Duty CLEAR Soap Mold (18 in long)
MEDIUM Heavy Duty CLEAR Soap Mold (12 in long)
SMALL Heavy Duty CLEAR Soap Mold (6 in long)
LARGE Soap Mold Classic with easy-open tabs (18 in long)
MEDIUM Soap Mold Classic with easy-open tabs (12 in long)
SMALL Soap Mold Classic with easy-open tabs (6 in long)
Soap mold with Dividers
"Eclipse" Soap mold loaf
Soap Shapers are 3D-printed with PLA filament – an environmentally friendly choice. PLA is a durable material derived from crops such as corn and sugarcane. It's renewable and biodegradable. Colours may vary.
It’s always best to clean your Soap Shaper Design Tools immediately after use. To clean, detach all parts before washing. HAND WASH ONLY with lukewarm water (30°C or 86°F) and dish soap. Towel- or air-dry. Products made from PLA are NOT dishwasher safe. PLA is heat sensitive. Exposure to heat may cause melting and/or warping. Avoid temperatures of 60°C or 140°F and higher.